Brinly PCT-17 BH Cu. Ft. Utility Cart - Manual (Page 6)

L-1821 Rev. E
Figure 1.
Figure 2.
6.
1a. Position the Longitudinal
Supports (24) over the bed, as
shown.
1b. Secure each support with
one Round Hd. Screw (1), two
Flat Washers (6), one Lock
Washer (5) and one Hex Nut
(4), as shown. Assemble finger
tight until all screws are
installed.
1c. Do not tighten Nuts.
6
Flat Washer, 5/16"
Qty. 16
5
Lock Washer, 5/16"
Qty. 8
6
Flat Washer, 5/16"
Qty. 4
5
Lock Washer, 5/16"
Qty. 2
4
Hex Nut, 5/16"
Qty. 2
26
Round Hd Screw, 5/16" x 1-1/4"
Qty. 2
26
Round Hd Screw, 5/16" x 1-1/4"
Qty. 8
4
Hex Nut, 5/16"
Qty. 8
4
5
26
6
4
5
6
26
6
6
24
11
2a. Position the Axle Support(11)
over slotted holes over the
Longitudinal Supports(24) and
bed.
2b. Secure Axle Support(11) with
Round Hd. Screw (26),
Washer(6), Lock Washer(5) and
Hex Nut(4) as shown. Assemble
finger tight until all 8 screws are
installed.
2c. Do not tighten Nuts.
24
24
Install Supports
Install Axle Support