Brinly PCT-17 BH Cu. Ft. Utility Cart - Manual (Page 8)

L-1821 Rev. E
8.
Figure 5.
Figure 4.
22
Hex Nut, 5/16"
Qty. 2
13
Hitch Pin
Qty. 1
25
Cotter Pin
Qty. 1
2
Hex Bolt, 5/16" x 3/4"
Qty. 2
13
2
22
25
18
20
5a. Install Drawbar Assembly and Axle (20) as
shown. A light coating of grease or oil will aid in
inserting the Axle (20) though the Axle Support
(11).
5b. Verify that the lock bracket (12) engages the
lock bar (8). Adjustment can be made by
loosening the two screws that secure the lock
bracket and moving the lock bracket
forward or back to change engagement
and/or ease of operation.
11
7
8
12
Assemble Clevis
Install Drawbar & Axle
4a. Install Clevis (7) with Clevis
Pin (13) and Cotter Pin (25).
Install Hex Bolts (2) and Hex
Nuts (22), as shown.