BrightSign HD2000 Object Reference Manual - Manual (Page 21)

roQuadravoxSNS5
This object is used to control and wait for events on the Quadravox SNS5 serial button/LED box.
Interfaces:
 ifSetMessagePort
rotVOID SetPort(rotOBJECT)
 ifQuadravoxSNS5 – similar to ifGpioControlPort but with the addition of a Flash state
rotBOOL IsInputActive(rotINT32 id)
rotINT32 GetWholeState(rotVOID)
rotVOID SetOutputState(rotINT32 id, BOOL on_state,
BOOL flash_state)
rotVOID SetWholeState(rotINT32 on_state, rotINT32 flash_state)
rotVOID SetFlashRate(rotINT32 flash_rate)
Notes on flash rate: The range is from 0 to 31, 0 is fast, 31 is slow. The default is 2.
roQuadravoxButton
Similar to roGpioButton except that it originates from the Quadravox
Interfaces:
 ifInt – contains button id
rotINT32
GetInt(rotVOID)
rotVOID SetInt(rotINT32 id)
21