Draytek Vigor 2820 Series User Manual
Page 8
4
1
1
.
.
1
1
.
.
2
2
F
F
o
o
r
r
V
V
i
i
g
g
o
o
r
r
2
2
8
8
2
2
0
0
n
n
LED
Status
Explanation
Blinking
The router is powered on and running normally.
ACT (Activity)
Off
The router is powered off.
On
A USB device is connected and active.
USB
Blinking
The data is transmitting.
CSM
On
The profile of CSM (Content Security Management) for
IM/P2P application is active. (It is enabled from
Objects Setting >> CSM Profile).
On
Wireless access point is ready.
WLAN
Blinking
It will blink while wireless traffic goes through.
On
The router is ready to access Internet through DSL link.
DSL
Blinking
Slowly: The connection is ready.
Quickly: The connection is tranning.
On
The router is ready to access Internet through WAN
connection.
WAN2
Blinking
It will blink while transmitting data.
On
The DoS/DDoS function is active.
DoS
Blinking
It will blink while deleting an attack.
VPN
On
The VPN tunnel is active.
QoS
On
The QoS function is active.
LED on Connector
On
The port is connected.
Off
The port is disconnected.
Left LED
(Green)
Blinking
The data is transmitting.
On
The port is connected with 1000Mbps.
LAN 1(Giga)
Right LED
(Green)
Off
The port is disconnected with 10/100Mbps.
On
The port is connected.
Off
The port is disconnected.
Left LED
(Green)
Blinking
The data is transmitting.
On
The port is connected with 100Mbps.
LAN 2/3/4
Right LED
(Green)
Off
The port is disconnected with 10Mbps.
On
The port is connected.
Off
The port is disconnected.
Left LED
(Green)
Blinking
The data is transmitting.
On
The port is connected with 100Mbps.
WAN 2
Right LED
(Green)
Off
The port is disconnected with 10Mbps.