Draytek Vigor 2820 Series User Manual
Page 12
8
1
1
.
.
1
1
.
.
4
4
F
F
o
o
r
r
V
V
i
i
g
g
o
o
r
r
2
2
8
8
2
2
0
0
V
V
S
S
LED
Status
Explanation
Blinking
The router is powered on and running normally.
ACT (Activity)
Off
The router is powered off.
On
A USB device is connected and active.
USB
Blinking
The data is transmitting.
CSM
On
The profile of CSM (Content Security Management)
for IM/P2P application is active. (It is enabled from
Objects Setting >> CSM Profile).
CPA (Content Portal
Authority)
On
The Web Content Filter is active. (It is enabled from
Firewall >> Web Content Filter Setup)
On
The router is ready to access Internet through DSL link.
DSL
Blinking
Slowly: The connection is ready.
Quickly: The connection is tranning.
On
The WAN1 or WAN2 connection is ready.
WAN 2
Blinking
It will blink while transmitting data.
On
Web Content Filter is disabled.
Line
Off
Web Content Filter is enabled to filter web pages.
On
The phone connected to this port is off-hook.
Off
The phone connected to this port is on-hook.
Phone 1/2
Blinking
A phone call comes.
LED on Connector
On
ISDN NT (ISDN S0 intern) mode is active and an
ISDN phone adapter is connected.
Left LED
(Orange)
Blinking
ISDN NT (ISDN S0 intern) mode is active and an
ISDN phone adapter is not connected.
On
A phone has been connected. If not, green LED will be
off.
Phone S0
Right LED
(Green)
Blinking
An ISDN phone is off-hook or a phone call comes.
On
ISDN NT (ISDN S0 intern) mode is active configured
from VoIP>>Phone Settings and an ISDN phone
adapter is connected.
Blinking
ISDN NT (ISDN S0 intern) mode configured from
VoIP>>Phone Settings is active and an ISDN phone
adapter is not connected.
Left LED
(Orange)
Off
It means ISDN TE mode is active which is configured
from VoIP>>Phone Settings.
On
A phone adapter with phone set has been connected
(ISDN S0 intern mode) or ISDN line has been
connected (ISDN S0 extern mode). It will be off if
there is nothing connected.
ISDN/Phone
S0
Right LED
(Green)
Blinking
In ISDN NT (ISDN S0 intern) mode, it means an ISDN
phone is off-hook or a phone call comes.
In ISDN TE mode, it means data, fax or voice (phone
call) is transmitting.