Boland Communications BVB Series - Manual (Page 20)

User Manual 20 of 26
Remote MENU
GPI Control & GPI#
- For allocating functions to particular GPI pins.
- When remote control operations are to be performed using the GPI Controller.
- GPI Control: GPI function Enable/Disable
- GPI 1 ~ 7
GPI Function Description
Undefined Not set (no function allocated)
Tally R, Tally G For lighting up the Red or Green tally lamp.
Marker On/Off Displays the marker.
Function 1~6 Activates FUNCTION 1~6 buttons
Scan Over Scan/Zero Scan/Under Scan/ Pixel to Pixel
Aspect Sets the aspect ratio of the images
Waveform
Activates WAVRFORM & Vector Scope (SDI
Only)
Aspect Marker Marker size Select.
Area Marker Area Marker size Select.
Center Marker Displays the center marker.
Input CVBS 1,2,3, Input G.B.R, Input SDI
1, Input SDI 2, Input Y.Pb.Pr , Input PC ,
Input DVI, Input HDMI
Switches the input source.
Menu Key, Enter Key, Up Key, Down Key
Left Key, Right Key
Use the key function by GPI.
GPI 7 : Power Key(Fixed)