Boland Communications BVB Series - Manual (Page 12)

User Manual 12 of 26
PICTURE MENU
Video Menus of each Input modes
< Video (NTSC) Picture menu> < PC Picture menu> < SDI, HDMI Picture menu>
Adjust
- Adjust the values of Brightness, Contrast, Color, Tint and
Sharpness directly from -50 to 50
Contrast, Brightness, Sharpness, Color (All Sources), Tint
(without PC, DVI, HDMI, Component), Phase (Component).
Color Temperature Control
- For Setting the Color temperature or adjusting RGB Gain/Offset value directly
- User (User setting RGB gain value), VAR(3200K ~ 11000K), Often used value(11000K, 9300K, 6500K,
5400K,3200K) and 3D LUT Calibration value(D65
– 6504K/C-6774K/D-Cinema 6302K)
-Color Space: Native/BT.709/SMPTE-C/EBU/NTSC/D-Cinema
SCAN
1. Over Scan
– 95% input size and fit the selected display size
2. Zero Scan – 100% Input size and fit the selected display size
3. Under Scan – 105% Input size and fit the selected display
size
4. Pixel to Pixel
– Display size is an input size. If input resolution
is bigger than panel size, fit the panel size