Blu Bathworks TSP922 - Manual (Page 13)

1 866 907 0122 blubathworks.com
2013-10
®
12
11
1 866 907 0122 blubathworks.com
2012-06
MANIFOLD
The manifold has always to be connected between the thermostatic mixer and shut off
valve.
The manifold, in off position, allows the passage of water from the inlet to the shut off
valve. In open position water flows also through the two outlets. In case both outlets are
not needed, close one with the plug provided in the package.
( ATTENTION THE MANIFOLD DOES NOT WORK AS A DIVERTER)
OPEN OFF
1) Unscrew the chromed
adapter, paying attention not
to lose the O-ring.
Remove the cover plate.
2) Unscrew the threaded rod
with a 17mm wrench.
3) Before unscrewing the
headwork, make sure that
both water inlets are closed.
Unscrew the headwork with
a 17mm wrench.
2)
3)
(⅝”).
(⅝”).