Blu Bathworks TEP431 - Manual (Page 5)

2013-12
1 866 907 0122 blubathworks.com
®
4
Step 1 - Assembly of the Control Fixing Bracket to the
In-wall
Plate
Step 2 - In-wall
Rough In Plate
Finish the wall by tiling or using
drywall.
Finish the wall by tiling or using drywall. Using the trim plate, the
control fixing brackets must be positioned using the supplied
in-wall rough-in plate with their centres 70mm apart.
40mm diameter holes are required
Conduits should be used in the walls where necessary to
protect the cables and allow maintenance.
Attach the control fixing brackets using the four small screws
supplied in the plastic bagset for the control fixing brackets.
Step 3
Draw a line around the bracket
collars, flush with the wall.