Blu Bathworks TEP431 - Manual (Page 12)

2013-12
1 866 907 0122 blubathworks.com
®
11
Step 7 Step 8
Step 10 Step 9
Re-insert the inlet connectors retaining bolt.
Remove the outlet connectors’ retaining bolt.
Fully insert the outlet connectors into the outlet
valves (one long and one short connector).
Note: Outlet 1 is the default outlet. When
turner on, water will flow through this outlet first. If a
bath filler option is required, it must be connected to
Outlet 1.
Important: Flush through the pipework before
connection.
Filter screen for inlet is highly recommended.
Attach the NPT adaptors to the hot & cold water
supply connections.
15V
Battery
WLAN
Valve
Controlle
Disp
Hot
Cold
15V Battery
WLAN
Valve
Contro
ller Dual Wh
eel
1
2
hot
cold
not supplied