Blu Bathworks TEP421 - Manual (Page 17)

Step 22 - Connect flow/outlet control data cable
Connect the data cable from the flow / outlet control to the ‘Dual Wheel’ connection in the processor.
Step 23 - Connect back up battery
Connect the battery cable to the ‘Battery for battery back up’ connection and place the battery in the compartment.
15V
Battery
AUX
15V
ACCU
TLI
AUX 15V
Battery
WLAN
15
2014-01
1 866 907 0122 blubathworks.com
®
16
2013-12
1 866 907 0122 blubathworks.com
®
6
Step 22 - Connect flow/outlet control data cable
Connect the data cable from the flow / outlet control to the ‘Dual Wheel’ connection in the processor.
Step 23 - Connect back up battery
Connect the battery cable to the ‘Battery for battery back up’ connection and place the battery in the compartment.
15V
Battery
AUX
15V
ACCU
TLI
AUX 15V
Battery
WLAN
15
Step 14 - connect flow/outlet control data cable
Step 15 - connect the back-up battery
Connect the data cable from the flow volume/
divertor control to the “dual wheel” connection in
the “AUX” port in the control box.
Connect the battery cable to the “Battery for battery
back-up” connection and place the battery in the
compartment.
Note: Back-up battery is pre-installed. Follow instructions below when replacement is required.