Blu Bathworks TEP421 - Manual (Page 14)

2014-01
1 866 907 0122 blubathworks.com
®
13
2013-12
1 866 907 0122 blubathworks.com
®
3
Step 3 Step 4
Step 6 Step 5
If required, use the supplie template to mark the
position of the control mixer fixing holes in the
selected location.
Remove the inlet connectors’ retaining bolt.
Fully insert the inlet connectors into the inlet valves
(one long and one short connector).
If required, the ‘nut’ ends of the inlet
connectors (and outlet connectors) can be cut off
and compression fittings can be used to attach
the pipework.
Fix the control box in position using the
screw kit supplied.