Bladez Fitness Synchro GS Indoor Cycle - Manual (Page 20)

20
CONSOLE OVERVIEW
BUTTONS
MODE: To confirm all settings.
SET: To set up the value of TIME, DISTANCE, CALORIES and PULSE. You can hold the
set button to increase the value quickly. (The computer has to be stop.)
RECOVERY: To test heart rate recovery status
FUNCTIONS
SCAN: Displays all function RPM/SPEED/TIME/DISTANCE/CALORIES/PULSE in
sequence.
RPM: Displays the pedaling Rotation Per Minute. The RPM and SPEED will switch to
another display every 6 seconds after exercise starts.
SPEED: Displays the user’s exercise speed.
TIME:
1)You can press the SET button to set target time between 0:00 to 99:00 for countdown
function.
2) TIME can be set up by the user or accumulated automatically for count up function.
DISTANCE:
1) Your can press the SET button to set target distance between 0.00 to 99.50 for countdown
function.
2) DISTANCE can be set up by the user or accumulated automatically for count up function.
CALORIES:
1) You can press the SET button to set target calories between 0 to 9990 for countdown
function.
2) CALORIES can be set up by the user or accumulated automatically for count up function.
PULSE: Displays the user’s pulse. User may set the target pulse. When pulse value reaches the
target, the computer alarm will beep.