Bladez Fitness Synchro GS Indoor Cycle - Manual (Page 13)

13
ASSEMBLY INSTRUCTIONS
STEP 1
1. Assemble the front stabilizer (81) with 4 screws
(95) and 4 flat washers (96).
2. Assemble the rear stabilizer (91) with 4 screws
( 95) and 4 flat washers (96).
STEP 2
1. Assemble the left pedal (99-L) to the left crank
and the right pedal (99-R) to the right crank.
2. Assemble the saddle (100) to the seat post (seat
slider, 78). Position the saddle at your desired seat
angle and tighten the bolts on the underside of
the seat with Screwdriver (1) tool.