System assembly – Diversified Ceramics DISPLACEMENT FOLLOWER 5100 User Manual
Page 4
Displacement Follower User’s Manual
Version 1.4, April 19, 2004
IM1008
Page 2
System Assembly
1
Inspect the equipment for damage that might have occurred during shipment. If you find any damage, notify the
shipping company immediately.
2
Attach the interconnecting cable from the control unit to the optical head and secure with the lock ring.
3
Attach the lens systems to the optical head. The lens screws into the extension barrel, and the extension barrel
screws into the head. The thread system in the head is a standard Leica, 39mm diameter. Note that the 105mm lens
comes attached to the 72mm extension tube. The 72mm extension is factory set and should come set to the correct
length.
4
Connect the control unit to a 100-120 VAC, 50/60 Hz power source.