Beurer FCE 80 - Manual (Page 19)

19
7. cleaning and maintenance
Warning!
• Observe the safety notes in the Safety chapter.
w Safety pages 13 to 14
• The device must be switched off at the On/Off
switch after every use and before cleaning.
• Unplug the power supply unit from the mains
socket.
• Never clean the charger with the power supply
unit plugged in.
> Switch the device off using the On/Off switch
> Unplug the power supply unit from the mains
socket
> Wipe the ultrasound head with a tissue
Skincare product residues should be thoroughly
removed.
> If necessary, clean with a slightly damp cloth
Important!
• Clean the device using only the methods
specified.
• Under no circumstances may liquid enter the
charger.
• Do not use any solvent-based cleaning
products.
• Only use a mild flushing agent or vinegar/
vinegar-based cleaner to perform cleaning or
disinfection work.
After cleaning
> Plug in the power supply unit
> Charge the device
w Initial use w Charging the battery