Denon AVR-2309 - Manual (Page 28)

Make detail settings for various parameters.
Manual Setup
SOURCE
SELECT
op
SOURCE SELECT
op
[TEST]
[A. MENU]
SOURCE
SELECT
[Front]
[Rear]
Button located on both the main unit and the remote control
unit
BUTTON
Button only on the main unit Button only on the remote control unit [BUTTON]Symbols used to indicate buttons in this manualF Menu screen F MENU 1.Auto Setup 2.Manual Setup 3.Input Setup 4.Parameter 5.InformationSpeaker SetupUse this procedure to set the speakers manually or if you wish to
change the settings made with the auto setup procedure.a Speaker Confi gurationSelect speaker confi guration and size.
(bass reproduction capability)Front SpeakerSelect front speaker size.[Selectable items] Large SmallSubwooferSelect subwoofer use.[Selectable items] Yes NoCenter SpeakerSelect center speaker use and size.[Selectable items] Large Small None2.Manual Setup2.HDMI Setup1.Speaker Setup4.ZONE2 Setup5.Option Setup3.Audio SetupFor details on how to select, set and cancel settings for each menu, see “Menu Operations” (vpage 17).Get
ting StartedConnectionsSet
upPla
yback
Remote ControlMulti-zoneInf
ormationTroubleshootingENGLISHEven when the surround back speaker setting is other than
“None”, sound may not be emitted from the surround back
speaker, depending on the playback source. In this case, make
a menu “Parameter” – “Surround Parameter” – “SB CH Out”
setting other than “OFF” (vpage 40).• Select “Large” or “Small” not according to the physical size of the speaker but according to the low frequency reproduction capabilities
based on the frequency set at “Crossover Frequency” (vpage
26).• When “Front Speaker” is set to “Small”, “Subwoofer” can automatically set to “Yes”.• If “Subwoofer” is set to “No”, “Front Speaker” is automatically set to “Large”.• If “Surround Speaker” is set to “None”, “Surround Back Speaker” are automatically set to “None”.• When “Front Speaker” is set to “Small”, “Center Speaker” can not be set to “Large”.• When using just one surround back speaker, connect it to the left channel (SBL).Large : Select this when using large speakers with ample low frequency reproduction capabilities.Small : Select this when using small speakers without ample low frequency reproduction capabilities.None : Select this when no speaker is connected.Yes : Select this when a subwoofer is connected.No : Select this when no subwoofer is connected.2spkrs 1spkr : Select the number of surround back speakers.Surround Back SpeakerSelect surround back speaker use and size.[Selectable items] Large Small None 2spkrs 1spkrSurround SpeakerSelect surround speakers use and size.[Selectable items] Large Small NoneSpecifi cations
Button only on the remote control unit [BUTTON]
Symbols used to indicate buttons in this manual
F Menu screen F
MENU
1.Auto Setup
2.Manual Setup
3.Input Setup
4.Parameter
5.Information
Speaker Setup
Use this procedure to set the speakers manually or if you wish to
change the settings made with the auto setup procedure.
a Speaker Confi guration
Select speaker confi guration and size.
(bass reproduction capability)
Front Speaker
Select front speaker size.
[Selectable items] Large Small
Subwoofer
Select subwoofer use.
[Selectable items] Yes No
Center Speaker
Select center speaker use and size.
[Selectable items] Large Small None
2.Manual Setup
2.HDMI Setup
1.Speaker Setup
4.ZONE2 Setup
5.Option Setup
3.Audio Setup
For details on how to select, set and cancel settings for each menu, see “Menu Operations” (vpage 17).
Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-z
one
Inf
or
mation
Tr
oubleshooting
ENGLISH
Even when the surround back speaker setting is other than
“None”, sound may not be emitted from the surround back
speaker, depending on the playback source. In this case, make
a menu “Parameter” – “Surround Parameter” – “SB CH Out”
setting other than “OFF” (vpage 40).
• Select “Large” or “Small” not according to the physical size of the
speaker but according to the low frequency reproduction capabilities
based on the frequency set at “Crossover Frequency” (vpage
26).
• When “Front Speaker” is set to “Small”, “Subwoofer” can
automatically set to “Yes”.
• If “Subwoofer” is set to “No”, “Front Speaker” is automatically set
to “Large”.
• If “Surround Speaker” is set to “None”, “Surround Back Speaker”
are automatically set to “None”.
• When “Front Speaker” is set to “Small”, “Center Speaker” can not
be set to “Large”.
• When using just one surround back speaker, connect it to the left
channel (SBL).
Large
: Select this when using large speakers with ample low
frequency reproduction capabilities.
Small
: Select this when using small speakers without ample low
frequency reproduction capabilities.
None
: Select this when no speaker is connected.
Yes
: Select this when a subwoofer is connected.
No
: Select this when no subwoofer is connected.
2spkrs 1spkr
:
Select the number of surround back speakers.
Surround Back Speaker
Select surround back speaker use and size.
[Selectable items] Large Small None
2spkrs 1spkr
Surround Speaker
Select surround speakers use and size.
[Selectable items] Large Small None
Specifi
cations