Bematech KC-4112 Rev.1.1 User Manual

Page 6

User’s Manual

Characteristics

Specifications

Printing

Method:

Thermal Line Printing

Dot Density:

8 dots/mm (203 dpi x 203 dpi)

Print Width:

104 mm (4.1”) (832 dot-positions)

Print Speed:

80 mm/s (3.15”/s) (fastest, printing ASCII)

Characters per line:

34, 46, 69 and 92

Character Set:

Alphanumeric CP850, CP860 and CP437

Features

Modular design.
Automatic cutter (full and partial cut).
Presenter with retractable function: 450 mm/s (17.7”/s).
High reliability.
Low paper sensor (paper near end).
Automatic paper loading.
Bar code type: UPC-A, UPC-E, EAN13, EAN8, CODE 39, ITF, CODABAR,
CODE 93, CODE 128, ISBN, MSI, PLESSEY, PDF-417.

Communication

Buffer Capacity:

3 Kbytes

Interface:

Parallel (Unidirectional), Serial(RS-232) and
USB (optional)

Serial interface specification:

• Baud rate: configurable 9600 or 19200
• Start bit: 1 bit
• Data bits: configurable 7 or 8 bits
• Parity bit: odd / even or no parity
• Stop bit: one bit or more

Power requirements

Voltage:

24 Vdc ± 10%

Current:

2 A nominal

Operating temperature:

5 to +40ºC (+41 to +104°F)

Environment

Storage temperature:

-20 to +60ºC (-4 to +140°F) (except for paper)

Operating humidity:

35 to 80% RH, non condensing

Storage humidity:

10 to 90% RH, non condensing (except for paper)

Reliability

Print head service life:

100 Km, hundred million pulses

Cutter lifetime:

500,000 cuts

Chapter 2

TTTTTechnical Specifications K

echnical Specifications K

echnical Specifications KC

CC-4112

-4112