Bematech KC-4112 Rev.1.1 - Manual (Page 23)

KC-4112 . Revision 1.1
23
Character types
ASCII Dec Hex Description
ESC - n 45 2D Underlined mode on (n=1) or off (n=0).
ESC 4 52 34 Italic mode on.
ESC 5 53 35 Italic mode off.
ESC E 69 45 Emphasized mode on.
ESC F 70 46 Emphasized mode off.
ESC t n 116 74 Selects code page: n=2 for CODEPAGE 850 and n=3 for CODEPAGE 437.
Default=CODEPAGE 850.
ESC S n 83 53 n=0 (enable superscript characters)
n=1 (enable subscript characters)
ESC T 84 54 Disable superscript and subscript modes
ESC ! n 33 21 Select print mode
Print width, character width and height
ASCII Dec Hex Description
DC2 18 12 Condensed mode (92 columns) off.
DC4 20 14 One-line expanded mode off.
ESC d n 100 64 Double height on (n=1) or off (n=0).
ESC H 72 48 69-column mode on (default).
ESC P 80 50 69-column mode on (default).
ESC SI 15 0F Condensed mode (92 columns) on.
ESC SO 14 0E One-line expanded mode on.
ESC V 86 56 One-line double height on.
ESC W n 87 57 Expanded mode on (n=1) or off (n=0).
SI 15 0F Condensed mode (92 columns) on.
SO 14 0E One-line expanded mode on.
Bit images and graphics
ASCII Dec Hex Description
ESC $ n1 n2 36 24 Fill in blank bit columns, from the actual column until column number
(n1+n2*256), where n1+n2*256 ≤ 832.
42 33 2A 21 24-bit graphics. Programs bit image for 24 bits, in double density where
n1+n2*256 is the number of bit-columns that will be sent (see below)
and b1...bn are the bytes that compose the bit image. For each column
one may need 3 bytes to complete. So, if you need to send an image with
an 8-column width you may send 24 bytes to fill those columns. A full
line has 832 bit columns so a full line will need 832*3 = 2496 bytes.
75 4B 8-bit graphics. Selects the “8 pin” bit image (compatible with matrix
printers) where you use n1+n2*256 columns, with 1 byte per column
thus using a lower resolution and up to 832 columns.
ESC * ! n1
n2 b1...bn
ESC K n1
n2 b1...bn