Bematech KB-1800 - Manual (Page 7)

7
U
S
e
R
’S
MANU
A
l KB
-1800
·
R
evision 1.3
Chapter 2
Technical Specifications KB-1800
Characteristics
Printing
Features
Communication
Power Requirements
environment
Reliability
Media
Specifications
Method:
Thermal line Printing
Dot Density: 8 dots/mm (203 dpi x 203 dpi)
Print Width: 72 mm (2.83”) (576 dot-positions)
Print Speed: 100 mm/s (3.94”/s) (fastest printing ASCII)
Characters per line: 24, 32, 48 and 64
Character Set: Alphanumeric Code Page 437, Code Page 850, Code Page
858 and Code Page 860
Modular, flexible and lightweight design
Automatic cutter (full and partial cut)
High reliability
low paper sensor (paper near end)
Automatic paper loading
Downloadable firmware – update your printer software on site
Bar code type:
UPC-A, UPC-e, eAN13, eAN8, CODe 39, ITF, CODABAR,
CODe 93, CODe 128, ISBN, MSI, PleSSeY, PDF-417
Buffer Capacity: 32K Bytes
Interface: Parallel (Unidirectional), Serial(RS-232) and USB 1.1
Serial interface specification:
Baud rate: 9600 or 115200
Start bit: 1 bit
Data bits: 7 or 8 bits
Parity bit: odd / even or no parity
Stop bit: one bit or two bits
Voltage: 24 VDC ± 10%
Current: 2 A nominal
Operating temperature: 0 to +45ºC (+32 to +113°F)
Storage temperature: -20 to +60ºC (-4 to +140°F) (except for paper)
Operating humidity: 35 to 85% RH, non condensing
Storage humidity: 10 to 90% RH, non condensing (except for paper)
Print head service life: 100 Km, hundred million pulses
Cutter lifetime: 1.5 x 10 6 cuts (Using paper Votorantin KPH756)
Type: Single-ply thermal paper roll
Thickness: 60 to 100 um
Width: 79.0~80.0 mm (3.11~ 3.15”)
Roll diameter: external 8” (maximum) with internal 1” core. Please contact
your dealer for more details.
* Thermal side is on the outside of the roll
Recommended • TF50KS-e made by NIPPON SeISHI or equivalent
paper brand: • AF50KS-e made by JUJOTHeRMAl
• KF50 made by KANZAN
• P350 made by KSP
• KPH756 made by VCP
• KPH856 made by VCP
• KPH868 made by VCP