Technical specifications kc-1800 – Bematech KC-1800 User Manual

Page 7

KC-1800 · Revision 1.1

Chapter 2

Technical Specifications KC-1800

Characteristics
Printing

Specifications
Method:

Thermal Line Printing

Dot Density:

8 dots/mm (203 dpi x 203 dpi)

Print Width:

72 mm (2.83”) (576 dot-positions)

Print Speed:

80 mm/s (3.15”/s) (text mode)

Characters per line:

24, 32, 48 and 64

Character Set:

Alphanumeric Code Page 850, Code Page 858, Code
Page 860 and Code Page 437

Modular, flexible and lightweight design
Automatic cutter (full and partial cut)
Presenter with retractable function
High reliability
Low paper sensor (paper near end)
Automatic paper loading
Downloadable firmware – update your printer software on site
Supported Barcodes:

UPC-A, UPC-E, EAN13, EAN8, CODE 39, ITF, CODABAR,
CODE 93, CODE 128, ISBN, MSI, PLESSEY, PDF-417

Buffer Capacity:

32K Bytes

Interfaces:

Parallel (Unidirectional) and Serial(RS-232) or USB (1.1)

Serial interface specification:

Baud rate: 9600 or 115200
Start bit:

1 bit

Data bits:

7 or 8 bits

Parity bit:

odd / even or no parity

Stop bit:

one or two bits

Voltage:

24 VDC ± 10%

Current:

2 A (4 A load, 1s max)

Operating temperature: 0 to +45ºC (+32 to +113°F)
Storage temperature:

-20 to +60ºC (-4 to +140°F) (except for paper)

Operating humidity:

35 to 80% RH, non condensing

Storage humidity:

10 to 90% RH, non condensing (except for paper)

Print head service life: 100 km, one hundred million pulses
Cutter lifetime:

500,000 cuts

Type:

Single-ply thermal paper roll

Thickness:

67±5 um

Width:

79.0~80.0 mm (3.11~ 3.15”)

Roll diameter:

External 8” (maximum) with internal 1” core. Please contact
your dealer for more details.
* Thermal side is on the outside of the roll

Recommended

• TF50KS-E made by NIPPON SEISHI or equivalent

paper brand:

• AF50KS-E made by JUJOTHERMAL
• KF50 made by KANZAN
• P350 made by KSP

Media

Features

Communication

Power Requirements

Environment

Reliability