Belshaw Adamatic Sugaring Table - Manual (Page 5)

Parts List
#1
#1
#2
#4
#3
#3 #2
(actual size of hardware)
PLEASE NOTE:
To mount drawers onto custom
equipment with angle frame construction,
one of the following kits is required:
• Kit #605499 for galvanized frame, or
• Kit #609700 for stainless steel frame
ASSEMBLY INSTRUCTIONS
Enclosed Drawers for
Tables with Angle Frame
CAUTION
insPect contents iMMeDiAteLY AnD FiLe cLAiM With DeLiVerinG cArrier For AnY DAMAGe.
SAVE YOUR BOX AND ALL PACKING MATERIALS.
You Are resPonsiBLe For DAMAGe to Your unit iF returneD iMProPerLY PAcKeD.
(continued on Page 6)
5
Tools needed:
• 11/32˝ or 9mm socket or wrench
• Phillips screwdriver
How to determine if you have an “angle frame” table:
If your table framing does not resemble the framing above, see channel frames on front page.
angle framing
“Angle framing,” indicated in illustration at right,
runs front-to-back underneath tabletop.
Drawers #501572, 502943, 502946, 502947, 502971 and 502972
for galvanized for stainless
frame steel frame
# qty description part # part #
#1 2 Drawer Mounting Bracket 373779 373780
#2 8 #8 x 3/8˝ Machine screw 373748 377888
#3 8 #8 Lock nut 313196 375035
#4 1
Drawer enclosure
* varies per order *
(pan not shown)