Maintenance, Changing and cleaning filters – Delta AP200 User Manual
Page 10
10
Fig. 16
5.
Fig. 16, illustrates the air cleaner being used in a
floor sanding application.
Fig. 17
6.
Fig. 17, illustrates the air cleaner suspended from
wooden ceiling supports for overhead operation.
WARNING: Keep a minimum of seven feet
between bottom of air cleaner and the floor surface.
When suspending the air cleaner from the ceiling or
other overhead support, make certain the supporting
hardware (not supplied) is securely anchored into a
wooden supporting structure as shown in Fig. 17.
WARNING: NEVER SECURE MOUNTING HARDWARE
TO DRYWALL, DROP CEILING TILE/FRAME, OR NON-
STRUCTURAL MEMBERS.
MAINTENANCE
Fig. 18
CHANGING AND
CLEANING FILTERS
1.
DISCONNECT MACHINE FROM POWER SOURCE.
2.
To remove the outer first stage filter (H) Fig. 18, lift
and pull out the bottom of the filter as shown.
H