beautypg.com

Raid 10 (striping over mirrored sets), Figure 7, 5 raid 10 (striping over mirrored sets) – Dell POWEREDGE RADI H800 User Manual

Page 25

background image

Dell

DELL PERC H700 and H800 Technical Guide

25












Figure 7. Example of RAID 6 (Single Virtual Disk with 5 drives)

Advantages of RAID 6

Can survive the loss of two disks without losing data

Data redundancy, high read rates, and good performance

Disadvantages of RAID 6

Requires two sets of parity data for each write operation, resulting in significant decrease in

write performance

Additional costs because of the extra capacity required by using two parity blocks per stripe

Retrieval of parity information after a drive failure takes longer than with mirroring

5.3.5

RAID 10 (Striping over Mirrored Sets)

RAID 10 combines striping and mirroring to produce large virtual disks with high performance and
fault-tolerance. The performance gain comes from striping across mirror sets without the need for
parity calculations. See Figure 8.
Although this delivers the highest performance, the drive storage overhead is 100 percent because
the entire virtual disk is mirrored. This is an excellent solution for sites that require the highest level
of performance and redundancy, as well as the fastest recovery of data after a drive failure.

Drive 1

Drive 2

Drive 3

Drive 4

Drive 5

Parity

Generation

Q parity

Q parity

Q parity

Q parity

Q parity

Data 1

Data 2

Data 3

P parity

Data 5

Data 6

P parity

Data 8

Data 9

P parity

Data 11

Data 12

P parity

Data 14

Data 16

Data 15

Data 18

P parity

Data 17

Data 19

This manual is related to the following products: