Beisler 1281-5 - Manual (Page 23)

5.8 Stacker
The finished workpieces are stacked on the throw-over stacker 2.
The stacked and clamped workpieces can be removed by actuating the
foot switch 1.
The stacker is accessed by a control pulse. The pneumatic functions
can be taken from the pneumatic wiring diagram.
Caution: Risk of injury!
Do not reach into the working area of the throw-over stacker during the
stacking operation.
Manual stacking
–
Press key 3 at the control panel.
A stacking process is carried out.
Removing stacked parts
–
Actuate foot switch 1 and keep it actuated.
– Remove the stacked parts.
19
1
3 2 1