Beisler 1225-4 - Manual (Page 23)

1-21
6.4.1 Selection of the operation language
Position the cursor on the program number and press the Minus key once.
This will be displayed:
D : 8 0 0 0 P R O G .
0 0 0
X X X
D E U T S C H
Move the cursor using the arrow keys onto the displayed operation language
(here: deutsch = german) and press the Plus key, until the desired operation
language is displayed.
Move the cursor back on „000“ and press the Plus key to select the desired
sewing program.
Hint
The names of the sewing programs will always be displayed in that language,
which has been used for the entering.
6.4.2 Setting the display contrast
Open the page „Program 000“ (see above) and position the cursor on the
circle icon colored black and white. Press the Plus or the Minus key to set the
contrast of the display.
Move the cursor back on „000“ and press the Plus key to select the desired
sewing program.