Beisler 1225-4 - Manual (Page 10)

1-8
2.3 Use as agreed
The Single-head Serging Unit 1225/4 has been developed for the automatic
serging of inside and outside seams at trouser parts with or without knee-
lining.
DANGER
This machine has been developed and build for a certain purpose. Adaptions
may influence security equipments negatively. We recommend to contact our
service staff in such a case.
2.4 Description of the machine
The Single-head Serging Unit 1225/4 allows the rational and automatic
serging of trouser parts. The machine is equipped with a sewing head and a
transportation facility, with which the fabrics are transported in the range of
the sewing head and to the stacker.
The machine is equipped with a hot adhesion facility for the production of
front trousers with kneelining, where one point can be fixed.
All components of the machine are mounted on a base frame made of
square steel pipes and controlled by an innovative micro-processor system.
Machine operation is achieved with an operation device. Here you can open
several control programs, define new programs and check all machine
components individually for maintenance and repair duties.