Beisler 1225-4 - Manual (Page 15)

1-13
5 Components of the machine
The machine contains several components, which are arranged according to
their function:
1. Adhesion facility at the right-handed side of the working table for the fixing
of kneelining and front trouser.
2. Working table for the alignment and insertion of the fabrics.
3. Operation device above the working table.
4. Spool rack for the sewing threads.
5. Sewing head with contour guiding and top feed adjust for the serging of
inside and outside seam; additionally equipped with a swing-out device for
the transportation of the fabrics to the stacker.
6. Mains /Emergency-Stop switch to switch on/off the machine.
7. Stacker for the stacking of the sewed trouser parts.
8. Collecting basket for the warp threads and sewing rests.
5.1 Adhesion facility
1 Control stamp temperature
2 Display stamp temperature
3 Clamp button
4 Separation slot
5 Top stamp
6 Adhesion clamp
7 Adhesion button
8 Adhesive tape
9 Carrying paper
10 Roll of adhesive tape
11 Knob to open the holder of the adhesive tape roll