Linking into the simatic manager – BECKHOFF FM33xx User Manual

Page 26

I/O configuration

FM33xx

Linking into the Simatic Manager

The following steps are required for linking the TC-Plug into the Simatic
Manager in simple mode and for configuring it.

• Install the GSD file in the Simatic Manager, add the module in the

hardware configuration and set the PROFIBUS address;

• Data format: MOTOROLA; Connection Channel 0: Channel

connected; set;

• n times for n channels: Add Channel compact, set the required I-

addresses for the data;

• Append Channel State Open Circuit;

• Append Channel State Back Voltage;

• Append Measure Control;

• Append Measure State;

• Download the configuration into the station;

• Start master;

• Reset TC-Plug by switching it on and off (power is removed);