BECKHOFF PT100 - Manual (Page 7)

PT100 4-fold temperature measurement Beckhoff II/O System
Date : 12 March 97 Version : 1.1 Page 7 of 10
3. Technical specifications
Number of channels Four, (multiplex)
Resolution 12 bit
Measurement value display 2 byte, (
ϑ
x 10)
Converter range temperature -50 to +150 degrees C
0 to +512 degrees C in progress
Monitoring Display of two control channels for
monitoring the module,
reset via fibre-optic bus
Connections Plug-in for PT100 sensor
(2-wire, 4-wire)
Data port II/O system fibre-optic light guide
Transmission rate 2.5 Mbaud, 25 µs for 32 bit
Supply voltage 24 VDC (± 10%)
Power consumption 0.1 A
Casing type Open card carrier, snap-on device mounting
rail as specified in DIN EN 50022, 50035
Dimensions (W * H * D) 168 * 111 * 65 mm
Weight Approximately 550 g
Operating temperature ±0..+55 øC
Storage temperature -20..+70 øC