Hyundai H-CMD2002 - Manual (Page 60)

60
4. Press the buttons on the panel or 8/ buttons on the RC or touch the desired button on the screen to
select the desired value.
5. Press PLAY/PAUSE / ENTER / SCAN button to confirm.
TV shape: select the width/height of the image: 16:9 (wide screen), 4:3 (normal view).
This function is not available for some discs.
Angle mark: set the angle indicator mode (when the DVD has multi-angle content): On (view indicator), Off
(don t view indicator).
Press the ANGLE button on the RC to change the angle.
View mode: select the viewing mode: Fill (fill the screen with the picture), Original (original mode), H fit (fit
horizontally), W fit (weight fit), Fit to scrn (fit to screen), Pan & scan (Pan and scan mode).
Audio
1. Enter the AUDIO menu.
2. Use the
buttons on the panel or 8/ buttons on the RC or touch
the desired item on the screen to select the settings: Pink noise, DRC,
Cntr ctrl, Rear ctrl, Down sampling.
3. Press the buttons on the panel or 9/: buttons on the RC or touch
the desired button on the screen to enter the list of values.
4. Press the buttons on the panel or 8/ buttons on the RC or touch
the desired button on the screen to select the desired value.
5. Press PLAY/PAUSE button to confirm.
Pink noise: use the built in pink noise to adjust each channel output volume or verify if audio output quality is
normal by adjusting the output volume during listening. Select among: Off (don t use pink noise), Left (left
channel pink noise), Center (center channel pink noise), Right (right channel pink noise), Left surr (left surround
channel pink noise), Subwoofer (subwoofer pink noise).