BECKHOFF DK9122-0510-0025 User Manual
Page 8
Industrial PC
Diagnostics and configuration
Application Note DK9122-0510-0025
This publication contains statements about the suitability of our products for certain areas of application. These statements are based on typical features of our products. The examp-
les shown in this publication are for demonstration purposes only. The information provided herein should not be regarded as specific operation characteristics. It is incumbent on the
customer to check and decide whether a product is suit-able for use in a particular application. We do not give any warranty that the source code which is made available with this
publication is complete or accurate. This publication may be changed at any time with-out prior notice. No liability is assumed for errors and/or omissions. Our products are described
in detail in our data sheets and documentations. Product-specific warnings and cautions must be observed. For the latest version of our data sheets and documentations please visit
our website (www.beckhoff.com).
© Beckhoff Automation GmbH, May 2010
The reproduction, distribution and utilisation of this document as well as the communication of its contents to others without express authorisation is prohibited. Offenders will be
held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design.
C++
C#
IPC parameters
ADS
C++
Visual Basic
PLC library
local
OPC-UA
local
remote
UPnP
remote
LAN
C#
Fig. IPC parameter communication paths
– PLC and Motion Control on the PC www.beckhoff.com/TwinCAT
– PC Control for all applications www.beckhoff.com/IPC
– System Management Bus
http://infosys.beckhoff.com/content/1033/tcsystemmanager/reference/smb.htm
– Creating a message box in TwinCAT
http://infosys.beckhoff.com/content/103/tcplclibsystem/html/tcplclibsys_adslogdint.htm
– Reading of SMB values via ADS
– Modular Device Profile (MDP)
New Automation Technology
Beckhoff