BECKHOFF AM8100 - Manual (Page 11)

Handling
4 Handling
4.1 Transport
• Climate category: 2K3 according to EN 60721
• Transport temperature: ­25 °C ­ +70 °C, max. fluctuation 20 K/hour
• Transport humidity: relative humidity 5% ­ 95%, non­condensing
• The servomotor may only be transported by qualified personnel and in the manufacturer's original
recyclable packaging.
• Avoid hard impacts, particularly at the shaft end.
• If the packaging is damaged, check the motor for visible damage. Inform the transport company and, if
necessary, the manufacturer.
4.2 Packaging
• Cardboard packaging
Motor type Max. stacking height
AM8100 10
4.3 Storage
• Climate category 2K3 according to EN 60721
• Storage temperature: ­25 °C ­ +70 °C, max. fluctuation 20 K/hour
• Air humidity: relative humidity 5% ­ 95%, non­condensing
• Max. stacking height: see table Packaging
• Storage time: without limitation
• Store only in the manufacturer’s original recyclable packaging
4.4 Maintenance / Cleaning
• Maintenance and cleaning only by qualified personnel.
• The ball bearings have a grease filling with a service life of 30,000 hours under normal operating
conditions. The bearings should be replaced after 30,000 hours of operation under rated conditions.
• Check the motor for bearing noise every 2,500 operating hours or once per year. If any noises are
heard, stop the operation of the motor. The bearings must be replaced.
• In motors with optional shaft seal ring the ring must be lubricated every 5,000 hours. We recommend
„Mobilgrease TM FM 222“ from Mobil.
• Opening the motor invalidates the warranty.
• Clean the housing with isopropanol or similar.
Attention
Destruction of the servomotor
Never immerse or spray the servomotor.
Synchronous servomotor AM8100 11 Version 1.1