BECKHOFF AM2000 - Manual (Page 6)

6 Motor series AM227..297
Manufacturer Declaration
12/2001
BECKHOFF
Manufacturer declaration
According to the EG-Machine-guideline 89/392/EWG, appendix II B
We, the company
Elektro Beckhoff
Unternehmensbereich Industrie Elektronik
Eiserstraße 5
D-33415 Verl
declare, that the product
Motor series AM2
(types AM227, AM237, AM247, AM257, AM277, AM297)
is intended exclusively, in its standard version, for installation in another machine and that its
commissioning is forbidden until it has been established that the machine into which this product is
to be installed conforms to the provisions of the EC Directive in its version 89/392/EEC.
We confirm that the above-mentioned product conforms to the following standards:
73/23/EWG Low voltage directive
VDE 0530 / DIN 57530 Provisions for rotating machinery
DIN 42950
Design
DIN 748 Cylindrical shaft ends
DIN 42955 True running, coaxiality and concentricity
DIN ISO 2373 Vibration class
Issued by: Management
H. Beckhoff
This Declaration does not contain any assurance of properties. The notes on safety and protection
in the operating instructions must always be observed.