BECKHOFF AM2000 - Manual (Page 18)

II.2.1 Connection methods
l Carry out the wiring in accordance with the valid standards and regulations.
l Only use our preassembled shielded leads for the resolver and power connections.
l Connect up the shielding according to the wiring diagrams in the Installation
Instructions for the servoamplifier.
l Incorrectly installed shielding inevitably leads to EMC interference.
In the table below you find all leads supplied by us. Further information referring to chemi-
cal, mechanical and electrical qualities can be received from our applications department.
Insulating material
Sheathing
- PUR (Polyurethane, identification 11Y)
core insulation - PETP (Polyesteraphtalate, identification 12Y)
Capacity
Motor lead
- less than 150 pF/m
Resolver lead - less than 120 pF/m
Technical Data
—
All leads are suitable for trailing.
— Technical data refer to mobile usage of leads.
Life time : 1 Million bending cycles
— The temperature range refers to the operation temperature.
— Identification: N = numbered cores
F = cores with colour code according to DIN 47100
B = cores with letter identification
( ) = shielding
Cores
[mm²] Identification Temperature range
[°C]
Cable diameter
[mm]
Bending radius
[mm]
Remarks
(4x1,0) F -30 / +80 10,5 105
Motor lead (4x1,5) B -30 / +80 11,3 115
(4x2,5) N -5 / +70 12,7 125
(4x1,0+(2x0,75)) F -30 / +80 12 120 Motor lead with
integral brake
control leads
(4x1,5+(2x0,75)) B -10 / +80 12,5 125
(4x2,5+(2x1)) B -30 / +80 13,8 140
(4x2x0,25) F -30 / +80 6,9 60 Resolver lead
18 Motor series AM227..297
Installation / Commissioning
12/2001
BECKHOFF