Directed Electronics G38106 - Manual (Page 5)

Step 6: Using the plastic grille ring as a template, mark the
mounting holes with a pen.
Step 7: Pre-drill mounting holes using a 1/8" drill bit.
WARNING: Window mechanisms and electrical wires and other
expensive car parts have a nasty habit of hiding where you
least expect. CHECK BEFORE YOU DRILL!
Step 8: Pull the wire through the speaker opening and connect to
the speaker. Be sure to observe proper midrange polarity
during this process.
Step 9: To mount the speaker, the speaker is placed through the
grille ring from the front. Place the speaker and the grille
ring in the installation hole. Align the mounting screw holes
and drive in the four mounting screws. Push the perforated
metal grille back into the grille ring, using the supplied black
butyl material to secure it.
MOUNTING PANEL
GRILL RING
SPEAKER
#8 1-1/4”
SHEET METAL SCREWS
GRILL INSERT
4