BECKHOFF C9900-U3x0 User Manual

Page 14

Text mode
Original mode

Installing the UPS

Make sure, that the address of the driving CP link card is correct. Click
onto the tab UPS to complete the configuration of this device.

In order to activate the UPS under TwinCAT, the check box Use UPS must
be selected. The wait time dictates the period of time before the PC will
shut down after failure of the external supply voltage.

System Manager:
tab UPS CP9030

After the settings are made, make sure,

• to create the relations,

• check the configuration and

• safe the settings into the registry

These points can be found in the action menu.

C9900-U3x0