Connecting the battery – BECKHOFF C9900-U3x0 User Manual
Page 11

Power pack for Beckhoff IPC with UPS
Connecting the Battery
Normally, the battery is mounted in an control cabinet, near to the industrial
PC. The fixing on DIN rail enables a simple and quick mounting and
demounting.
The connection of the 24 V
DC
to the battery should be made via a cable
with 2 x 1.5mm². The transmission of the 24V
DC
and the UPS-voltage is
made via a cable with 4 x 1.5mm² (see .figure). At the end of the cable, the
version of the connecting plug is connected, according to the PC series.
8
C9900-U3x0
See also other documents in the category BECKHOFF Computer Accessories:
- C9900-P209 (20 pages)
- C9900-P224 (17 pages)
- C9900-U330-0010 (12 pages)
- C9900-U332-0010 (19 pages)
- CP9035 (39 pages)
- CP-Link3 (78 pages)
- CU8004-0000 (10 pages)
- CU8006-0000 (18 pages)
- CU8005-0000 (18 pages)
- CU8800-0010 (18 pages)
- CU8801-0000 (18 pages)
- CU8850-0000 (14 pages)
- CU8810-0000 (19 pages)
- CU8860-0000 (17 pages)
- CU8871-0000 (19 pages)
- CU8870-0000 (15 pages)
- CU8880-0000 (14 pages)
- CP29xx (33 pages)
- FC9891-0000 (43 pages)
- CP70xx (19 pages)
- CP39xx (27 pages)
- CP6608-C9900-E197 (18 pages)
- CP68xx (20 pages)
- CP66xx (21 pages)
- CP79xx (24 pages)
- CP790x-140x (38 pages)
- C9900-G0xx (30 pages)
- C9900-M316 (12 pages)
- C1230S (13 pages)
- C3210 24V (6 pages)
- C5002 (10 pages)
- CP6003 (14 pages)
- C9900-A174 (20 pages)
- C9900-U33x (17 pages)
- IP-4GVI20 (6 pages)
- IPC-Security (73 pages)