BECKHOFF CU8890-0000 - Manual (Page 37)

Appendix
Technical data
Input USB-2.0 input with USB-B connector
Antenna terminal Connection via a reverse SMA plug (RP-SMA)
Standard IEEE 802.11 b/g and TCP/ UDP IP
Data transfer rate max. 54 Mbit/s (in adhoc mode max. 11 Mbit/s)
Data transmission band 2,4 GHz
Channels 11
Channel separation
5 MHz
Channel width 22 MHz
Available Worldwide
Data rate adjustment
Dynamic data rate adjustment at mode b: 1, 5, 11 Mbit/s;
at mode g: 6, 9, 12, 18, 24, 36, 48, 54 Mbit/s.
Not usable for Realtime Ethernet or EtherCAT!
Encryption 64-/128-Bit-encryption, WEP, WPA, WPA2
Cisco-compatible extension CCX, providing PEAP and LEAP
Power supply Power supply via USB input connector (5 V
DC
)
The following conditions must be observed during operation:
Environmental conditions Ambient temperature: 0 to 55°C (operation)
-25°C to +70°C (transport/ storage)
Atmospheric humidity: Maximum 95%, non-condensing
Vibration/ Shock resistance EN 60068-2-6 / EN 60068-2-27, EN 60068-2-29
EMC resistance burst/ ESD EN 60000-6-2
Burst: EN 60000-6-4, EN 300328 V1.7.1
Safety of persons in electromagnetic fields: EN 50371:2002
Protection class IP20
Do not use the CU8890 in
areas of explosive hazard The WLAN Controller may not be used in areas of explosive hazard.
Dimensions (W x H x D) app. 35 mm x 98 mm x 77 mm (with mounting for DIN rail)
Weight app. 90 g
Assembly on 35 mm mounting rail conforms to EN 50022
Installation position any
Approvals CE, FCC, IC
Use original Beckhoff accessories
Note
The CE conformity of the CU8890-0000 is only warranted when operated
with original Beckhoff accessories (see chapter
Antennas )
The CU8890-0000 meets demands of the EN 300328 V1.7.1 and is
approvable in all countries of the EU as well as Liechtenstein, Switzerland,
Ireland and Iceland.
The CU8890-0000 meets also demands of FCC Part 15.4 and Canada IC.
More countries on request.
CU8890-0000 35