BECKHOFF CU8890-0000 - Manual (Page 31)

Software installation
Operating the CU8890 as Access Point
Access point operation is not possible under Windows CE
Note
By default the CU8890 WLAN-Controller is in client modus. Access point
operation is also only possible under XP/ Xpe, but not under Windows CE.
Access point operation is only possible with Ralink RaUI
Configuration Software
Note
Access point operation is only possible with Ralink RaUI Configuration
Software, but not with the Microsoft Zero Tool. A display resolution of
1024*768 pixel is required for configuration the Ralink RaUI Configuration
Software.
When the CU8890 should be
operated as access point you can
change the mode by right mouse
click on the Ralink symbol in the
task bar:
The symbol in the task bar has now be changed
into AP:
The
window Internet Connection Sharing (ICS) appears:
Select the WAN adapter and click OK. The Ralink Wireless Utility window
appears and you can type the network name (SSID) and the channel.
Click Apply and the alignments will be saved.
CU8890-0000 29