BECKHOFF CU8860-0000 User Manual
Page 10
Installation
CU8860-0000
8
3.2.2
Mounting on a 35 mm mounting rail
Alternative the unit can be installed on a mounting rail. To use this installation option an adapter for the rail is
needed. It can be ordered together with the unit. The adapter is fixed with four screws (M3, 4 mm). The picture
shows the installation position:
The unit is snapped onto the rail as follows:
1. Lower the backside of the installed adapter onto the rail and press it down.
2. Push the unit towards the rail until it snaps in.
To release the CU8860-0000 from the mounting rail:
3. Press down the unit until it gets loose on the rail
4. Pull the unit from the mounting rail