BECKHOFF CP9030 - Manual (Page 16)

Technical Data CP9030
Inside Technology 686LCD SBC
CLOSED
J203, J209, J212, J214, J217, J220, J223, J226, J229, J232, J235, J238,
J240, J245, J250
LO100 (CP9030_4) for 15 inch display
OPEN
It is essential that the remaining jumpers are OPEN to avoid damaging the
CP-Link card or the graphic card / SBC!
Ribbon Cable ST202 (50 pin RM2.54)
Pin assignment 1:1
Pin 40 of the ribbon cable must be disconnected
MITAC 251 SBC
CLOSED
J203, J204, J215, J216, J221, J227, J228, J233, J234, J239, J240, J245,
J246
LO100 (CP9030_4) for 15 inch display
OPEN
It is essential that the remaining jumpers are OPEN to avoid damaging the
CP-Link card or the graphic card / SBC!
Ribbon Cable ST202 (50 pin RM2.54)
Pin assignment 1:1
Pins 3, 4 of the ribbon cable must be disconnected
Vampower 7 Graphic Card
CLOSED
J227, J229, J230, J230, J236, J238, J244, J246, J250
LO100 (CP9030_4) for 15 inch display
OPEN
It is essential that the remaining jumpers are OPEN to avoid damaging the
CP-Link card or the graphic card / SBC!
Ribbon Cable ST202 (50 pin RM2.54)
Pin assignment 1:1
Pins 29, 39, 43, 45 of the ribbon cable must be disconnected
Vampower 8 Graphic Card
CLOSED
J201, J202, J203, J204, J208, J239
LO100 (CP9030_4) for 15 inch display
OPEN
It is essential that the remaining jumpers are OPEN to avoid damaging the
CP-Link card or the graphic card / SBC!
Ribbon Cable ST205 (50 pin RM2.0)
Pin assignment 1:1
Pin 1-6 of the post connector remain open
CP9030 / CP9035 17