Appendix, Technical data, Appendix 31 – BECKHOFF C63xx-0030 User Manual
Page 33: Must be observed (see chapter, Technical, Data, Chapter
Appendix
Appendix
Technical data
Industrial-PC C6320
Dimensions (W x H x D):
93 x 196 x 226 mm (without mounting plate)
Weight:
4,0 kg (basic configuration)
Industrial-PC C6325
Dimensions (W x H x D):
133 x 196 x 226 mm (without mounting plate)
Weight:
6,0 kg (basic configuration)
Industrial-PC C6330
Dimensions (W x H x D):
107 x 196 x 226 mm (without mounting plate)
Weight:
4,6 kg (basic configuration)
Industrial-PC C6335
Dimensions (W x H x D):
147 x 196 x 226 mm (without mounting plate)
Weight:
6,6 kg (basic configuration)
Industrial-PC C6340
Dimensions (W x H x D):
134 x 196 x 226 mm (without mounting plate)
Weight:
4,5 kg (basic configuration)
Industrial-PC C6350
Dimensions (W x H x D):
148 x 196 x 226 mm (without mounting plate)
Weight:
5,1 kg (basic configuration)
Do not use the PC in areas
of explosive hazard
The Industrial PC may not be used in areas of explosive hazard.
The following conditions must be observed during operation:
Environmental conditions
Ambient temperature:
0 to 55°C
Atmospheric humidity:
Maximum 95%, non-condensing
Shock resistance
Sinusoidal vibration:
(EN 60068-2-6)
10 to 58 Hz:
0.035 mm
58 to 500 Hz: 0.5 G (~ 5 m/ s
2
)
During reading of CD-ROM:
10 to 58 Hz:
0.019 mm
58 to 500 Hz: 0.25 G (~ 2.5 m/ s
2
)
Impact:
(EN 60068-2-27/ -29)
5 G (~ 50 m/ s²), duration: 30 ms
During reading of CD-ROM:
5 G (~ 50 m/ s²), duration: 11 ms
Protection class
Protection class:
IP20
Power supply
24 V
DC
power pack
Supply voltage: 22–30V
V
DC
Power consumption:
C6320-0030:
approx. 70 W
(basic configuration)
C6325-0030:
approx. 70 W
C6330-0030:
approx. 75 W
C6335-0030:
approx. 75 W
C6340-0030:
approx. 70 W
C6350-0030:
approx. 75 W
C6320-0040:
approx. 95 W
C6325-0040:
approx. 95 W
C6330-0040:
approx. 100 W
C6335-0040:
approx. 100 W
C6340-0040:
approx. 95 W
C6350-0040:
approx. 100 W
When operated with UPS:
additional 30 W (while charging)
additional 44 W (with UPS-output)
Electromagnetic
Compatibility (EMC)
Interference resistance:
according to EN 61000-6-2
Emitted resistance:
according to EN 61000-6-4
Transport and storage
The same values for atmospheric humidity and shock resistance are to be
observed during transport and storage as in operation. The shock
resistance during transport can be improved by means of suitably packing
the Industrial PC. The ambient temperature during storage and transport
must be between -20°C and +65°C.
C63xx
31