BECKHOFF C63xx-0030 - Manual (Page 14)

Product Description
Interfaces
Interfaces to the
C63xx Industrial PCs
USB interfaces
USB1 – USB2
The two USB interfaces (1) and (2) are used for connecting the Control
Panel CP68xx or CP78xx. USB2.0 standard is supported.
Alternatively, peripheral devices with USB port may be connected.
Network connection
Network The PC is connected with the local network via the 10/100 Base-T RJ-45
connectors (3) and (4) of the On-Board Ethernet adapter.
DVI interface
DVI-I The DVI interface (5) is used for connecting the Control Panel CP68xx or
CP78xx. Alternatively, a monitor with DVI input or VGA input can be
connected.
For connecting a monitor with VGA input the adapter C9900-Z411 or
C9900-Z413 is required additionally:
• C9900-Z411: Adapter plug DVI-I to VGA
• C9900-Z413: Adapter cable DVI-I to DVI and VGA, 15cm
USB interface
USB3
An additional USB-interface (6) is used for connecting peripheral devices
with USB port. USB2.0 standard is supported.
Serial interface
RS 232
COM2
The basic version of the C63xx Industrial PC has one serial
interface COM2, using the type RS232, which is brought to a
9 pin SUB-D plug connector. The interface is located next to
the power supply connector.
The COM3 interface is internally connected to the power
supply unit.
Additional plug-in cards (optional)
Type plate A type plate is located at the plastic cap of the PC housing, providing
information about the Industrial PC equipment as delivered.
3
4
5
6
1
2
12 C63xx