BECKHOFF C5101 - Manual (Page 19)

Operating Instructions
Changing the filter mat
If the Industrial PC is used in an environment where the air is particularly
dirty, the fan's filter mat should be examined at regular intervals to see how
dirty it is, and should be exchanged, if necessary, for an original Beckhoff
filter mat (item number C9900-Z213, filter mat for C510x, 10 per pack).
Please also refer to chapter
Changing the filter mat .
Front view showing the filter
drawer
Access to the filter mat Access to the filter mat is obtained behind the front flap. This must be
opened with its key. The filter drawer (1) can then be pulled out towards
the right using the retention tongue (2).
After the mat (3) has been changed the filter is refitted in the reverse
sequence.
1
3
2
Shutting down
Disposal
Dismantling the Industrial
PC
Observe national
electronics scrap
regulations The device must be fully dismantled in order to dispose of it. The housing
can be sent for metal recycling.
Electronic parts such as disk drives and circuit boards must be disposed of
in accordance with national electronics scrap regulations.
C5101 17