Interfaces, Serial interfaces, Network connection – BECKHOFF C5101 User Manual
Page 11: Dvi (digital visual interface), Usb interfaces, Additional plug-in cards (optional), Interfaces 9
Interfaces
Interfaces to the C5101
Industrial PC
3
1
7
4
5
2
8
9
6
Serial interfaces
RS 232
COM1 - COM2
The basic version of the C5101 Industrial PC has two serial interfaces,
COM1 (1) and COM2 (2), using the type RS232, which are brought to a 9
pin SUB-D plug connector.
Network connection
Network 100/1000BASE-T The RJ-45 connector (3) allows the PC to be connected to a
100/1000BASE-T Local Area Network (LAN).
Network 10/100BASE-T
The RJ-45 connector (4) allows the PC to be connected to a
10/100BASE-T Local Area Network (LAN).
DVI (Digital Visual Interface)
DVI-I
The DVI connection (5) is used for transferring the video signal.
DVI-I standard is supported.
USB interfaces
USB1 – USB3
The USB interfaces (6) (7) and (8) are used to connect peripheral devices
with USB connections.
Two more USB interfaces are located behind the front flap.
USB2.0 standard is supported.
Additional plug-in cards (optional)
Type plate
There is a type plate on the top of the Industrial PC which provides
information about the hardware configuration of the Industrial PC at the
time it was supplied.
C5101
9