Power supply connection, Pin assignment of the connector, Technical data – BECKHOFF CP65xx User Manual
Page 15: Connecting socket, Contact spacing
Installation Instructions
Power Supply Connection
Supplied mains power unit The Industrial PC is fitted with a
• 100-240 V
AC
, 50-60 Hz power supply unit (standard) or
• with a 24 V
DC
power supply unit (Optional an uninterruptible power
supply (UPS) can be realized using the battery pack C9900-U330).
Danger
Danger of Explosion if using other battery packs!
Pin assignment of the connector
The 5-pin CAGE CLAMP plug connector and mounting flange illustrated is
located on the PC housing in order to connect the power supply.
Socket at the PC housing
Technical data
Connecting socket
Number of contacts
5
Contact spacing
5 mm
Minimum conductor cross-section
1.5
mm²
Minimum conductor cross-section
(AWG)
16
Rated voltage (EN)
250 V
Rated voltage (CSA)
300 V
Current EN [A]
12 A
Current CSA [A]
15 A
Length of stripped conductor
8 to 9 mm
Current carrying capacity of
the 100-240 V power
supply unit
Output voltages from
the 100-240 V power
supply unit
Current loading
maximum
+3,3 V
14 A
+5 V stand by
1,5 A
+5 V
16 A
-5 V
0,2 A
+12 V
9 A
-12 V
0,7 A
Current carrying capacity of
the 24 V power supply unit
Output voltages from
the 24 V power supply
unit
Current loading
maximum
+5 V
25 A
-5 V
1 A
+12 V
10 A
-12 V
1,5 A
CP65xx
13