Product description, Appropriate use, Interfaces – BECKHOFF CP62xx-xxxx-0030 User Manual
Page 8: Serial interface, Serial interfaces (internal), Dvi (digital visual interface), Usb-interfaces, Network connection, Power supply, Interfaces 7
Product Description
Product Description
Appropriate Use
The CP62xx Build-in Panel PC is designed for industrial application in
machine and plant engineering. A steel plate housing with aluminum front
contains a TFT display, touch screen/ pad (optional) and a PC keyboard
(optional). The Industrial PC is installed in the front of control cabinets.
When ordered the Build-in Panel PC optionally can be extended by
additional module slots or plug-in card slots.
Do not use the Build-in Panel PC in areas of explosive hazard!
DANGER
The build-in Panel PC must not be used where there is a risk of explosion.
Interfaces
Interfaces to the
CP62xx-xxxx
-0030/ -0035/ -0040
X102
X103
X110
X104 – X107
X108, X109
Serial interface
X102
Serial Interface COM1
The Industrial PC has one serial interface COM1, using the type RS232,
which is brought to a 9 pin SUB-D plug connector.
Serial interfaces (internal)
COM2
Additional interface (optional)
When the IPC is delivered you can order an additional interface, using the
type RS232 (C9900-E159), RS485 (C9900-E188) or RS422 (C9900-E189).
COM3
UPS (optional)
The serial interface COM3 is connected to the UPS (optional).
DVI (Digital Visual Interface)
X103
DVI out
The DVI connection is used for transferring the video signal. DVI-I standard
is supported.
USB-Interfaces
X104 – X107
USB out
The four USB interfaces are used for connecting peripheral devices with
USB connection. USB2.0 standard is supported.
Network connection
X108, X109
LAN
The two RJ-45 connectors allows the PC to be connected to a
10/100/1000BASE-T Local Area Network (LAN).
Power supply
X110
Power
The power supply for the Industrial PC is established via the
socket.
CP62xx-xxxx-0030/-0035/-0040 7