Connecting up external antenna, Switching the traffic assist highspeed on/off, Switching on – Becker TRAFFIC ASSIST HIGHSPEED 7934 User Manual
Page 22: General operations
21
General operations
Connecting up external
antenna
To enable reception under adverse re-
ception conditions, an external GPS an-
tenna can be connected (not included).
For this purpose, a closable connecting
socket is located on the rear of the hou-
sing. If no external antenna is connected,
this connection must always be closed
again.
X
Open the closure by pulling gently on
its upper surface.
X
Connect the external antenna up as de-
scribed in the manufacturer''s instruc-
tions.
Switching the Traffic Assist
Highspeed on/off
The unit is switched on and off using the
back key.
Switching on
X
Press the back key for a few seconds.
The unit is switched on. The manufactu-
rer's logo appears on the touch screen.
The following question appears shortly
thereafter:
Comply with highway code
X
If you agree with this request, press
the
OK key.
4003
Note:
Please deactivate the Becker
moodlights while driving in your
vehicle in order to prevent visual
distraction from the road traffic!
5014
Note:
The Traffic Assist Highspeed may only
be used in accordance with the applica-
ble national road traffic act!
5003
5002