Doro 820 - Manual (Page 23)

English
www.doro.com 23
The Answering Machine (830R)
Number of Rings
The number of rings before the answering machine answers can be selected between
2, 3, 4, 5 or TOLL SAVER.
1. Press
w
.
2. Scroll using
< <
/
> >
until
a
fl ashes in the display. Press
0 0 0
3. Press
0
repeatedly until the display shows 3/5.
0 0
4. Scroll using
< <
/
> >
to the required setting (2, 3, 4, 5 or TOLL). Press
0
to
0 0
confi rm setting and move to the next programming sequence, alternatively.
5. Press
w
to exit the Menu system.
Please note:
With Toll Saver selected, calls will be answered after fi ve rings until a new ICM message has been
recorded, any subsequent calls will be answered after three rings. Once these ICM’s have been erased
this cycle will be repeated. This is useful when remote accessing your unit, if there is no answer
after four rings no ICM messages have been recorded, you can therefore terminate the call before
you are charged.
Remote Code
A four digit code is required to gain access to the remote functions of the answering
machine (1111 when supplied). To increase security and simplify usage this code can
be altered to any four digit number of your choice.
1. Press
w
.
2. Scroll using
< <
/
> >
until
a
fl ashes in the display. Press
0 0 0
3. Press
0
repeatedly until the display shows 4/5, the current four digit code will
0 0
now be shown in the display.
4. Enter your new four digit code on the handset keypad. Press
0
to confi rm setting
0 0
and move to the next programming sequence, alternatively.
5. Press
w
to exit the Menu system.